Target reducers for Airsoft Texas Star
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A variety of snap on objects to obscure the target, increasing challenge. These were designed to work with the…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 17
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A variety of snap on objects to obscure the target, increasing challenge. These were designed to work with the Airsoft.com "Shapes" target system andshould work with styles other than the Texas Star that use the same size target paddles.
Mix and match, go all in on one style, EZ to remove and add as needed.
- Middle finger: Blocks the center of the target
- Half: blocks the lower half of the target
- Bullseye: Reduces the available target from 54mm to 25mm, 15mm or 10mm for masochists.
Print Settings: 5 walls + 50% infill seems to be a good point for durability with PLA+, we were able to directly shoot them multiple times with 300fps 0.2g pellets with no harm to the blockers. Recommend to print upright with supports.
Change 5/1/2025: Corrected some non-manifold geometry that could cause print issues.
5/3/2025: Added a stand so you can more easily swap between different apetures/blockers
Category: Hobby