3D Rig for 2x DJI Action 4 - Landscape
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will hold two DJI Action 4 cameras in an appropriate position for recording 3D video for VR viewing.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 1
- Views
- 184
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This will hold two DJI Action 4 cameras in an appropriate position for recording 3D video for VR viewing. The one camera is upside-down so the lenses can be 2.5" (6.35cm) apart to match an average IPD (interpupillary distance, or distance between your pupils).
If you put it on a flat surface and place the cameras in it, that's all you need. If the surface is flat, or it is moving, you can secure the cameras in place with a good elastic band.
If people are interested, I may create and upload a top piece, but I didn't need it at this point.
Remixed completely in PrusaSlicer! (Got someone else to verify the lenses would be level in Blender, and they're within a millimeter.)
Prints on the Mini+ if you rotate it 45 degrees to fit on the bed diagonally.
You may want to add support material under the one overhang or it may be ugly, but it will still work fine.
I only printed the base model so far, but I included the Top and the Full as well in case anyone wants them. I did not add a method to attach the top and bottom. You may be able to print the Full one in TPU as was intended with the original model.
The last pictures also feature the portrait version, available here:
https://www.printables.com/model/1287319-3d-rig-for-2x-dji-action-4-portrait