1 / 2
Convoy 3X21D Gaskets (SBT90.2)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Square gasket for the Convoy 3X21D for perfect centring of the emitter
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 72
- Makes
- 2
- Views
- 447
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
The bottom hole for the SBT90.2 is 10x11mm, so make sure you place it correctly.
PLA not recommended due to 50°C heat deflection temp, starts softening.
I use ASA for 100°C HDT, but PETG should be fine for 70°C HDT.
Use white colour filament.
0.08 - 0.1mm layer height
No supports required