1 / 3
Round sponge or soap holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another soap/sponge holder - round this time
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 44
- Makes
- 1
- Views
- 148
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
A round soap/sponge holder to fit my round bar of soap.
Inside diameter: 80mm / height of drawer: 5mm / total height: 10mm
Two version: with or without drainage. (same cover)
The cover is just a simple circle with a thickness of 3 mm. Make your own pattern in the Prusaslicer. If you don't know how:
- in print settings > layers and perimeters > horizontal shells > solid layers: put both on 0 (zero) to remove the top and bottom solid layers.
- in print settings > layers and perimeters > vertical shells: I upped this to 5 to give it a nice and solid border. Make it as thick as you find esthetically pleasing.
- in print settings > infill > fill pattern: pick any you like that allows water & soap to still go to the bottom ;)
- in the plater screen you can change the infill, which changes the pattern even more!
- Have fun!
The walls are 3mm thick, so you can scale as you see fit.
I used a concentric infill pattern for the top and bottom of the box, for a nice consistency of the pattern with the shape ;).