1 / 3
Center Hex Nut and M3x12mm; Threaded Spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified the center to hold a hexnut/locknut. I made the side cutouts deeper to accommodate M3x12mm. Threaded spacer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
I used an M3 locknut in the middle instead of the designer's flanged nut. I made the side cutouts deeper. This lets you use M3x12mm on the sides instead of M3x14mm which is uncommon. I added M8 threads to the spacer. It fits very well. I