Simulator Golf Mat Tee Anchor System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tired of collecting your tee after every shot of your golf mat? Introducing the Golf Tee Anchor System. This is designed
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 119
- Makes
- 0
- Views
- 780
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Tired of collecting your tee after every shot of your golf mat? Introducing the Golf Tee Anchor System. This is designed to be used through the tee holes that generally come already punched out through your golf mat. Install in a few easy steps:
- Print all parts using TPU. I have only tested all components with TPU. I used a sharpie marker to outline the numbers on the tees to help make them easier to see.
- Slide the base through the bottom of the mat.
- Slide the top plate over the top of the post on the top side of the mat.
- Attach one (or more) of the tees to the top plate with a piece of bungee type cord (best) or rope works in a pinch but may break more easily. I used clips with a swivelled end on one end but I am sure others will find better ways of attaching the tees to the anchor.
If you don't have premade holes in your golf mat you can use the “weight plate” version of the Base and Top Plate. You may want to use a longer piece of bungee or rope in this case to be as safe as possible and avoid any unnecessary ricochets!
Any feedback is welcome! This system has been working great for me so far and I hope others find it useful as well.