1 / 3
Topre spring tray (snap stackable with lid)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tray to store conical springs for electrocapacitive keyboards
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 43
- Makes
- 0
- Views
- 398
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A stackable tray for Topre conical springs so they don't get tangled. The trays slide and snap to each other, keeping it secure and compact in storage. Each tray is a 8x5 grid and can store 40 springs.
Print settings
- Material:
- PETG recommended for a longer-lasting snap-fit.
- PLA will work, but the snap-fit rails are likely to wear down over time which can cause the lid to loosen.
- Layer height: 0.20mm. Smaller layer heights can work as well, but the clearances were designed for 0.20mm.
- Supports: None
- Orientation:
- The tray should be printed with the bottom on the build plate.
- The lid should be printed with the top on the build plate to improve the surface finish. It'll print just fine in the opposite orientation though.