Valance Clip for Window Blinds
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Valance Clip for Window Blinds
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
I designed this valance clip for a set of blinds I’ve had for about 10 years.
After trying many clips from Amazon, I found that most didn’t fit well or looked unattractive—especially since they were all visible from the front. They were also usually single-use; the moment I tried to remove them for a thorough cleaning, they’d break.
So, I decided to design my own. This clip prints in just 15 minutes using a fast PETG profile.
While this design is specific to my blinds, if your dimensions are similar, it might work for you too. At the very least, I hope it can serve as inspiration for others facing a similar challenge.
I’m currently learning OpenSCAD and working on a customizable model for this clip. I’ll update this page once I have a working script ready.
Feel free to message me if you have ideas for alternave configurations or mounting methods i might include into the OpenSCAD model.