Mac Classic Bezel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I am repurposing an old Mac Classic case. I design this Bezel for holding a 4/3 display slightly larger than original
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 29
- Makes
- 0
- Views
- 409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Bezel has to be glued on the internal front case.
I used B7000 kind of phone glue (which is slow to hold, but can be removed by heating).
Holes are for M3 kind to screw directly, and should allow precise repositioning of the display.
There is 2 fincad models:
- one for the 3 parts of the bezel (top, bottom, side)
- one for the top attachment
Printing Notes:
AMF file provided rather than STL.
The bezel is designed to be printed upward (and use ironing to have nice flat face of the visible part of the bezel). That's why it is splitted into parts.
The attache are to be printed on the side, to have strong elasticity.
My notes on the complete project can be found here
Special Thanks
- kimjh for the life size Macintosh classic housing STL (used in my project CAD).
- GrabCad community