Refined Parametric Bathroom Radiator Hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of my Hook for Bathroom Ladder Radiator with the same stability but smaller upper retainer for easier cleaning.
- Rating
- 4.6 / 5
- Likes
- 10
- Downloads
- 57
- Makes
- 3
- Views
- 172
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I played around with my parametric OpenSCAD design of a bathroom ladder radiator hook and came up with a smarter solution to attach the hook to the radiator. And it still doesn't get pushed up or back when you remove the towel.
The retainer is now almost invisible. The upper pipe easier to clean. Multiple hooks can be attached directly on top of each other.
I've uploaded the dimensions of the two radiators in my house as examples.
- Pipe diameter 18.5 mm, outer pipe distance 53 mm
- Pipe diameter 22.5 mm, outer pipe distance 67 mm
The outer pipe distance is from the top of the pipe to the bottom of the pipe below. I found it the easiest to measure.
If your dimensions are different, I will be happy to upload them. Just send me a message.
You can also create your own hook. Just modify the parameters "pipe_diam" and “pipe_outer_dist”. But there are many more parameters, such as hook diameter and length, width, thickness, etc. Feel free to experiment. And please share your experience.
Print in the specified position. No support required.
Printed in PETG. This is probably be more suitable then PLA depending on the heating water temperature.