Abschlussprofil-Bilderrahmen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Abschlussprofil is meant to be used with bathroom tiles. I missuse the profile as an inexpensive and lighweight…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Abschlussprofil is meant to be used with bathroom tiles. I missuse the profile as an inexpensive and lighweight frame for Posters. OBI sells the profile in long pieces of 2.70 m https://www.obi.de/p/3349412/viertelkreis-abschlussprofil-alu-eloxiert-silber-matt-8-mm-x-2-7-m
The profile is available in different colors, and materials, such as steel, plastic, and aluminum. the poster frame is made with miter joins. To cut the 45°deg angles precisely, a jig is used.
The jig consists of two parts. The larger one 3d-printed, and a smaller one cut from a 3mm or 2mm piece of steel. The jig included here snugly fits on the 8mm profile manufactured by Italian company arcansas. The same profile is sold in Scandinavia under a different name: https://wallmann.dk/produkt/fliseprofil-alu-rondalu/ My printers calibration makes Testblock02 fit perfectly on the profile, testblock01 should be tight and testblock03 should be loose.
The jig has two slots each slanted at exactly 45°. The slots meet at the top surface where the profile can be cut and cleaned with a file. To make the 4d-printed jig withstand a saw blade while cutting it is recommended to add a steel plate to the top of the jig.
3D-printed cornerpieces hold the frame togehter. The cornerpieces can be secured to the profile with hot glue.
Category: Other