Headphone Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sleek and minimalist headphone stand that keeps your headset organized, elevated, and always within easy reach.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 178
- Makes
- 1
- Views
- 468
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Layer Height:
Layer Height: 0.2 mm
Initial Layer Height: 0.2 mm
Walls:
Wall Line Count: 2
Wall Thickness: 0.8 mm
Top/Bottom:
Top Layers: 5
Bottom Layers: 5
Top/Bottom Thickness: 0.8 mm
Infill:
Infill Density: 20%
Infill Pattern: Grid (or your preference)
Material (PLA):
Printing Temperature: 200°C
Build Plate Temperature: 60°C
Enable Retraction: Yes
Speed:
Print Speed: 50 mm/s
Travel Speed: 120 mm/s
Travel:
Combing Mode: Within Infill
Z Hop When Retracted: Enabled (optional)
Cooling:
Enable Print Cooling: Yes
Fan Speed: 100%
Support:
Generate Support: Yes
Support Structure: Tree
Support Placement: Touching Buildplate
Support Overhang Angle: 50°
Support Density: 15%
Support Z Distance: 0.2 mm
Build Plate Adhesion:
Adhesion Type: Brim (optional, for better first layer adhesion)
Ironing (for smoother top surfaces):
Enable Ironing: Yes
Iron Only Highest Layer: Yes
Ironing Pattern: Zig Zag
Ironing Flow: 10%
Ironing Speed: 30 mm/s