Nescafe DolceGusto capsule holder (rotating)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nescafe DolceGusto capsule holder (rotating)
- Rating
- 4 / 5
- Likes
- 11
- Downloads
- 55
- Makes
- 1
- Views
- 365
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
DolceGusto capsule holder. It rotates :)
You need a lot of superglue, so when putting together the sprocket and U-shaped holders, I recommend putting the holders and the sprocket together, wrapping them with a rubber band, and then, one by one, lifting the U holder and adding superglue to the joints.
The base should also be glued, note that the cap is glued to the edge, not the bottom of the base. I used a blank cap for the base and branded for the top.
When putting the lips, I used only one “Nescafe” lip; others are blank (beauty is in the simplicity) but you can use all of them branded, or neither - as you prefer.