CuteCat_02
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
6 colors to print this colorful cat poster
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Project: CuteCat.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 113x201mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm
Filaments Used:
PLA 3DHoJor Black Transmission Distance: 0.1
PLA Sunlu Misletoe Green Transmission Distance: 4
PLA Sunlu Red Transmission Distance: 4.1
PLA Sunlu Yellow Transmission Distance: 6
PLA Sunlu White Transmission Distance: 5.9
PLA Sunlu Cyan Transmission Distance: 0.1
This print uses 6 unique filaments, other brands of filament with similar TD should work as well
Swap Instructions for one AMS:
Start with Black (Slot1)
At layer #6 (0.56mm) swap to Misletoe Green (Slot2)
At layer #10 (0.88mm) swap to Red (Slot3)
Pause at layer 11 to allow color swap：
Slot1: Black --> White
Slot2: Green --> Cyan
At layer #15 (1.28mm) swap to Yellow (Slot4)
At layer #18 (1.52mm) swap to White (Slot1)
At layer #25 (2.08mm) swap to Cyan (Slot2)
At layer #26 (2.16mm) swap to White (Slot1) for the rest.