Side Click Pen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3d Printable version of the Tactile Turn Side Click Pen (https://tactileturn.com/products/side-click-pen).
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 333
- Makes
- 3
- Views
- 1,819
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Designed around the Pilot G2 ink cartridge and spring. The 3D printed spring needs to fit into the Top Button so that the Spring's long end and the Top Button's Beveled end are lined up (see CAD image). Inserting the spring and Top Button into the pen requires you to compress the spring more than you may think. It's fine, just do it. Line up the Spring's button to the hole in the main body and push. Make sure you have the ink cartage and pen spring in the main body before you add the spring and Top Button as its a pain to take back out (Possible, but difficult)
Note: Make sure you have “Detect Thin Walls” Enabled or the opening for the pen tip will be enlarged.