NetApp DS4243/DS4246 HDD Caddy and Blank plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3.5" HDD caddy and blank plate for NetApp DS4243 DS4246 disk shelves
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 47
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Recommend you use a material with a higher heat resistance than PLA as PLA can soften at the temps the drives may reach. I can just barely fit 2 of the caddies or 6 of the blank plates onto a 200x250mm build plate.
On the drive caddy, there are 2 hollow channels that you can put 0.75mm fiber optic into to show the drive status LEDs at the front.
The blank plate does not have holes cut out in the inner wall to help block and direct airflow over the populated slots and keep them cooler.
Use #6-32 x ¼" countersunk screws to mount the drive in the caddy.