1 / 2
demagnetized electric hurdy gurdy mk-2 crank arm. — image 1
1 / 2

demagnetized electric hurdy gurdy mk-2 crank arm.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

this is a new crank arm that uses a M4 bolt to enhance the effectiveness and durability of the locking bolt.

Rating
0 / 5
Likes
1
Downloads
12
Makes
0
Views
186
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution

this is a new variant of the crank arm for the electric hurdy gurdy by demagnetized which uses a m4 bolt with a longer distance to the shaft in order to provide much better durability, this crank has the same leverage as the original and will accept the same handle.

it is important to note the shaft hole is sized to be threaded onto a threaded 6mm rod, it cuts its own threads so just be sure to keep it aligned when starting. if you want to use it with a smooth shaft just know that you may need to drill out or sand the hole to fit.

i did not integrate a spacer in my design as i found the original too fragile and likely to fail so i suggest printing your own or using one of the bearings you had to have purchased for the shaft.

Tags