Catan insert: base game + Cities and Knights + Seafarers
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.38 – €5.35 net (excluding VAT)
For file: wares_tray_0.2mm_PLA_MK3S_4h45m_bed3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.86 excluding VAT (range midpoint).
- Weight reported by the author
- 63 g
- Print time reported by the author
- 4.76 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is an option to store the Catan main game, as well as “Cities and Knights” and “Seafarers” in a single box.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 126
- Makes
- 2
- Views
- 1,443
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Share Alike
This is an option to store the Catan main game and the “Cities and Knights” and “Seafarers” expansions in a single box. The models have been slightly changed from the original, so the “5 - 6 player” function is lost, as space was needed for the seafarers.
Print list:
all parts 1x
except:
- PiecesA: 2x
- PiecesB: 2x
- wares_tray: 4x
- tray_1-3 : 3x
- bar3: 4x
- bar4: 2x
Other required parts:
- 20x M3x7 screws (ideally countersunk head)
- (20x M3 washers)
Print settings:
Material: any (I used PLA and PETG)
Layer height: 0.2 - 0.3
Infill: 10 - 15%
There will certainly be changes in the coming years, so stay tuned.
-
Dies ist eine Option um das Catan Hauptspiel, sowie die Erweiterung "Städte und Ritter", sowie "Seefahrer" in einer einzigen Box zu verstauen. Die Modelle wurden aus dem original leicht verändert, sodass die Funktion des "5 - 6 Spieler" verloren geht, da Platz für die Seefahrer benötigt wurde.
Druckliste:
alle Teile 1x
außer:
- PiecesA: 2x
- PiecesB: 2x
- wares_tray: 4x
- tray_1-3 : 3x
- bar3: 4x
- bar4: 2x
Sonstige benötigte Teile:
- 20x M3x7 Schrauben (im Optimalfall Senkkopf)
- (20x M3 Unterlegscheiben)
Druckeinstellungen:
Material: beliebig (ich nutzte PLA und PETG)
Schichthöhe: 0,2 - 0,3
Infill: 10 - 15%
Es werden sicherlich in den kommenden Jahren noch änderungen kommen, also bleibt gespannt.