1 / 2
Fast Woven Tissue Box Cover (No Supports)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tissue box cover for square tissue boxes (4.5" x 4.5" x 5"). No supports needed.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Tissue box cover for square tissue boxes (4.5" x 4.5" x 5"). No supports needed. Kirkland tissue box and Overture Marble Easy PLA used for print photo. OrcaSlicer used to slice.
Print Size:
- Dimensions: 124mm x 124mm x 132mm ~(4.88" x 4.88" x 5.20")
- Weight: ~73 grams of PLA (24.35m)
Print Settings:
- Support: None
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Brim: Auto (5mm, 0.1mm gap)
- Skirt: On
Orientation:
- Oval face must be on build plate.
Optional Settings:
- Bottom Surface Pattern: Hilbert Curve
Notes:
- The height of each weave is 4mm while the top and bottom are 2mm. You may be able to use other layer heights, keep in mind the width of a wall is set at 0.4mm.
- There will be sides with more drooping than others, small drooping is normal. You may be able to rotate the print so that the fan cools all sides evenly enough.
- I did not rotate the STL because doing so increases the size of the files by ~3x.
- I got this idea after printing the Fast Print In-Spool Desiccant Containers