1 / 1
Strongarm Replacement Plunger Rod (LOW HARDWARE!!)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HAVE YOU EVER BROKEN YOUR STRONGARM??! THIS FIXES IT!!!!!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 15
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
May Be Fragile, use low cooling to increase layer bonding and try printing in PETG or another Filament Type, This is a legacy project of mine as my strong arm broke again in a different spot, not related to the part, it was related to me trying to slam fire it.
To use this plunger rod you need the following
original O-ring
A metal pin, i used a copper staple to provide a pivot point for the spring.
It basically uses the same design.
Print settings
You need supports
Print with about 5 walls
Print with 90% infill
Orientation
Plunger rod should be sticking up on the plate
catch and spring should be flat on the plate