Edwards EST 270-GLR Glass Bar Replacement (Hobby use only!)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement bar for the Edwards EST 270 fire alarm. NOT FOR SAFETY-CRITICAL USE, HOBBIEST ONLY!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement part for the Edwards 270 fire alarm's glass bar for hobbiest / enthusiest use only. Do not use in safety-critical conditions (e.g. for alarms wired to a real system) – buy official replacements. This is intended to provide an easy replacement for alarm collectors and hobbiests.
Recommended print parameters:
- Material: PETG*
- Color: Clear
- Infill: 100%
- Supports: Not needed if you use the model with built-in supports. Otherwise you'll likely need a raft to ensure buikd plate adhesion and to reduce wobble.
*PLA will work, but is very soft, and so will provide almost no resistance in the alarm.
Owing to how thin and tall this model is to print, I've included two different versions – one with custom supports and one without. The supports break away relatively cleanly and ensure wobbling is minimized. Be extra careful removing the supports, as it's easy to break the bar handling it, especially if you used PLA.