Pinna's optical illusion - hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge of Pinna's optical illusion Do the circles formed by the squares intersect or are they concentric?
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hueforge of Pinna's optical illusion
Do the circles formed by the squares intersect or are they concentric?
The photos shows the result in 200*200mm and a nozzle of 0.4
You can use a color other than gray as long as the contrast with the black and white is sufficiently present.
source : https://en.wikipedia.org/wiki/File:Pinna%27s_illusory_intertwining_effect.gif
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.36mm
Filaments Used:
PLA Black Transmission Distance: 0.6
PLA Gray Transmission Distance: 3
PLA White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #12 (1.04mm) swap to White for the rest.