1 / 3
Mokerlink switch rack ears
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed rack ears for my Mokerlink POE-2G080110GSM network switch to mount in a 10" rack.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 56
- Makes
- 1
- Views
- 301
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed rack ears for my Mokerlink POE-2G080110GSM network switch to mount in a 10" rack.
Note that Mokerlink made the same switch in 2 different hardware form factors. The version this model is for has dimensions of ~190*140*45mm.
Rack ears were printed in PLA using:
- 0.4 mm nozzle
- 0.20 mm layer height
- 3 vertical walls
- 15% infill
I used M3x8mm socket head cap bolts to mount. 10mm is probably long enough but I did not have any available.