Coolmingo - Drink Cooler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a gadget that speeds up the cooling of hot drinks.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 13
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Overview:
I like tea, but I don’t like waiting for it to cool down before I can drink it. That was the motivation behind building Coolmingo – Drink Cooler. It uses a 5015 fan to blow air across the surface of the drink, speeding up the cooling process.
I conducted a test, and the results show that the cooling time is cut in half. Boiling water cools quickly from 100°C to 80°C during pouring, but then cools down slowly in the cup. It took 13 minutes to reach 60°C, which is generally considered a pleasant temperature for drinking. With active cooling, the time was reduced to less than 6 minutes.
The fan is rated for 5V, so it can be powered by any USB port whether from a charger, PC, or power bank.
With different nozzles, it can be used to cool various drinks and foods.
I recommend to print it from PETG or other matariel which will survive hot drink temperature or use PLA but place a coaster under the cup.
Bill of Material:
- 4x M3x10mm Countersunk Bolt (optional M3x8mm)
- Rocker Switch 10x15mm
- USB-C Panel Socket
- Blower Fan 5015 5V 4500RPM
Connection:
