Milwaukee M18 Hackzall Tool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount that holds the Milwaukee M18 Fuel Hackzall 2719-20/2719-21.
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 241
- Makes
- 0
- Views
- 775
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
In support of my ongoing effort to organize my shop, I needed a better place to put my saw than a shelf. Not wanting to hang it vertically, I made a horizontal holder. Yeah, it takes up space, but it works for me.
I am using the left facing version, but I figured someone may not like it that way; so, I also made a mirrored version that faces the right. It does take up a bit of space at 11.5" x 4", I suggest you have at least a 300 mm build volume. I made a PDF drawing show the dimensions so people can plan accordingly. If you were to scale it down to 97% it will fit on a Bambu Labs X1C, and it will still work with the saw. You only lose about a 0.25" on the overall length and I designed in some wiggle room. I think the smallest you can make it before it doesn't fit is 80% but measure your saw and double check. I printed it full size so I'm not sure, just be aware than hole size will shrink and everything will be thrown off.
It' wasn't a very long print for me though, right around 4 hours. Please leave a comment or submit a make with your settings, suggestions, and experience if you make it. Thanks for looking!
{Print Settings}
Material: PETG
Layer Height: 0.20mm
Walls: 3 (with alternate wall turned on in Orca, so it varied between 3 and 4)
Floor and Ceiling layers: 5
Infill: 30% Cubic Subdivision