Caster Clamp for SCHLEPP ONE Camera Cart
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Caster Clamp for storing the Swivel Casters OR Twin Casters inside the Cart during transport.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Printable Caster Clamp for SCHLEPP ONE Camera Cart.
For mounting Swivel Casters OR Twin Casters inside SCHLEPP ONE Camera Cart during Transport.
Set of Screws required (included with Twin Caster purchases):
2x M6 x 8 // 2x M6 Flat Hex Nut
We recommend using a suitable filament: ABS, PA6, PA12 or similar, ideally also reinforced (e.g., with glass fiber).
We do not assume any liability for the use of self-printed accessory parts.
Before use, we recommend conducting your own load tests. For prototypes, we have consistently used industrially printed, glass fiber-reinforced PA12.
If you do not have a suitable converter, we recommend the freeware program CAD Assistant for personal use.
https://www.opencascade.com/products/cad-assistant/
With this freeware converter, you can open STEP files and automatically create a mesh by saving them, for example, as an STL file. The STL file format is supported by many slicer programs for 3D printing.