Fallout Vault stand for phones, tablets etc
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Phone, tablet etc stand inspired by the Fallout franchise
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 10
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Really liked this model as I came across it but found a few things I wanted to change. Firstly the Vault-Tec plate is cool but feels like it was too empty so added a Vault boy on it and a vault door. There's one for 101 and 111.
Printing:
I suggest .2mm for the base and door as they are bigger objects but smaller layer height for the plates as the Vaultboy face loses detail otherwise.
No supports needed.
Infill 15% or whatever you want
The assembly seemed a bit messy so I added a little ridge to the base so that the plate can sit on it as you glue it on. You can still use the little 1.75mm filament nubs but I didn't