1 / 3
Auping Auronde bedside caddy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bedside caddy for Auping Auronde beds. Easy to snap on and great to store things like nasalspray, tissues, phone + more.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 45
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Great for: tissues, phone, remote, nasal spray, small book, keys, small trees and melons.
Print parameters
- Printer: Prusa Mini+, FW 6.1
- Material: PLA
- Nozzle: 0.4mm
- Layer-height/profile: 0.2 mm speed
- Supports: none
- Input shaper: activated
- Optional: Modifier box for higher infill of the bracket (see photo)
This may not be necessary but I haven’t tested without
Models: There are 3 models:
No ridges for separator:
- v7a - smaller (printable on a Prusa Mini)
- v7b - bigger
Ridges for separator:
- v8a - like v7a but with ridges
- v8a section - for the above model
Measurements: inside - length is approx. because of the round edges
| A | B | |
|---|---|---|
| width | 10 cm | 10.7 cm |
| height | 8 cm | 8 cm |
| length | 17 cm | 21.5 cm |
| Filament | 220 gr | 230 gr |
TIP
- With the “place on face” tool of the Prusa Slicer, put the model on the flat side so the round part faces up.