Under Desk Drawer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Under Desk Drawer with hexagonal pattern and a fixed rail
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 76
- Makes
- 1
- Views
- 628
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi,
as probably everyone who's looking here for Under Desk Drawers … so it was with me that I had too much clutter on my desk. I looked at many models here but none really “clicked” with me. So I took some inspiration from a few other designs here and made this remix. I desigend it so exactly 2 drawers can fit under my monitor stand.
Size (inner measurements) 205,00 mm x 174,60 mm x 43,57 mm
my print settings:
- 0,4 nozzle @ 0,3 mm layer height
- 3 walls
- 15 % gyroid infill
- material: Elegoo Matte PLA black
- supports: no
- brim: no
- print orientation: see pictures
- print time: 1h44 min (51 gr.) & 5h11 (147 gr.)
notes:
- there are two holes in the rear of the drawer. You could use two M3 screws there as a pull out lock
- I printed my models with “external perimeters first” and 3 walls. With these settings I got a nice clean front. With 4 walls I got “ghosts” on the outside walls at the positions where the inner protusions are.
updates:
1) 03.02.2026 - V2.0 - first picture
- added a smaller variant: Size (inner measurements) 99,00 mm x 174,60 mm x 43,57 mm
- removed the cross in the rail
Happy Printing!