MiniWhip Power Injector Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MiniWhip Power Injector Case with 9V batteryThis is a case for the power injector delivered with my miniWhip active…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
MiniWhip Power Injector Case with 9V battery
This is a case for the power injector delivered with my miniWhip active antenna.
The Case has two holes to lead out the antenna and receiver connections via BNC sockets.
Power for the antenna is provided by the internal 9V battery or an external power supply via a hollow jack socket.
I have added two shottky-Diodes (SB140) to decouple both power supplies and added an 250mA polyfuse. (If you use the Shottkey diodes, then you should short out the diode on PCB to minimize voltage drop).
Print Settings
Printer Brand:
Anet
Printer:
A8
Doesn't Matter
Supports:
Doesn't Matter
0.4mm
Infill:
20%
Category: Other