Pocket-size lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made pocket size lamp for macro photography, or anything you like
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Printer settings
Layer height (important!) 0.15mm
Any material, I prefer Matte PLA and PETG
0,4mm nozzle
What you need to assemble:
M2 nuts 4pcs
M4x6 (up to M4x10, you can use any) cylinder head screws 4pcs
Electronics:
Any wires (I used silicone 28AWG)
Button with fixation and cap which is 4mm in diameter
TP4046 charging module https://a.co/d/gWEKKGM
MT3608 DC-DC Step Up Boost Power Converter https://a.co/d/fhBGJp4
Any li-ion battery up to 7,5mm height (check dimensions on the 3d model)
5x2mm LED, any colour https://www.amazon.com/dp/B005TB91KA?ref_=cm_sw_r_cp_ud_dp_PCDXMYQGEZXYQYBSYAAJ
10mm LED strips 3pcs, up to 70mm length
Good luck!, ask questions in the comments if needed