1 / 1
Planter with different levels, a bridge and medieval building — image 1

Planter with different levels, a bridge and medieval building

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A nice planter for e.g. succulents

Rating
0 / 5
Likes
6
Makes
0
Views
72
Reviews
0

Updated at source:

Model information

A nice drained planter with a medieviel house on the top and a small bridge.

 

You have sizes for 4 different bed sizes, but you can scale it (just take a look at your print preview, that details are not getting into issues):

180mm

250mm

300mm

350mm

 

The planting area is one big connected and you have drain holes in the bottom of the planter.

I highly recommed a material, which is UV stable, at least PETG. You may also print it in PLA, but then you should paint it afterwards to get is UV stable.

Three or four perimeter should be enough and maybe lightning infill to have the infill where you need it for printing and not everywhere.

If the planters weight is too low, you can place some stones inside the planter.

 

 

Only the building is created with AI, everything else is done in Blender.

 

Would be happy to see your makes!

Tags