Tesla 3 Highland HydroFlask Cupholder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed the center console base to fit a 32oz hydroflask and storage pockets.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
HydroFlask 32oz bottle cupholder for Tesla Model 3 Highland center console. This is remixed from the original file on Printables to get the basic shape of the center console, and then redesigned around my water bottle. This is designed to fit with the HydroFlask rubber boot on the bottle, without the rubber boot will work but the bottle may shift around more. Also incorporated some storage cubbys and a cutout to access power outlet with enough clearance to open/close the outlet cover. The cupholder piece is not a tight fit in the center console, so I used a strip of hook velcro on each side and stays pretty secure.
I printed this in PETG-CF (hopefully it'll survive the summer) and printed it on a 45 degree angle to take advantage of the nice CF finish. You could lay this flat on the bottom and print really easily if you prefer. I printed with 2 walls and 10% Cross Hatch infill, 0.4mm nozzle. You could probably reduce the infill quite a bit, it came out very solid at my settings.