Layer adhesion test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To execute the test, you need to insert the Test_OBJ in the Adhesion_Testframe. Then you hold/stand on the frame and bull on the Test_OBJ until it breaks.
I use a bow scale which saves the maximum force after the part breaks:
szdc88 Bogenschießen Bogenwaage, 110 Pfund Digital Bogenschießen Waage Recurve Bogen Compound Bogen Jagdwaage Gepäckwaage mit LCD-Display11 : Amazon.de: Fashion
Print settings
Adhesion_Testframe:
0.2 mm layer height
4 walls
Gyroid Infill
25% Infill
no support
Test_OBJ:
0.2 mm layer height
2 walls
100% Infill
cocentric fill pattern
cocentric top fill pattern
cocentric bottom fill pattern
5mm brim
I made this model because I had some trouble with the JAYO PETG Matt filament.
I compared it with a GEEETECH PETG with the same print profile:
GEEETECH broke at 13.9kg
JAYO broke at 2,6 kg
