1 / 2
Core One bed leveling pad
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bed leveling pad
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 42
- Makes
- 0
- Views
- 809
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Bed leveling pad.
Place on the Z-axis motor screw heads. Adjust the height of the pad according to the measured values. It is necessary that it does not touch the bottom plate. It must only rest on the screw heads. I recommend cutting the upper surface of the pad, which the bed will rest on during Z-axis calibration. Lower this surface to the height required for bed leveling. My printer needed to raise the bed by 1mm on the left and back with pads to level the bed.