Microswitch box vertical and horizonal versions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 different enclosures to house a working micro-switch. One can be mounted horizontally and the other vertically
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
I needed a way to easily house and mount a roller microswitch in a vertical orientation so it could be used as a momentary closed push button. I used 24AWG insulated solid core copper wires and soldered them to the switch's connectors. I also inserted a 22mm X 6mm X 5mm soft foam rubber block (which I cut from a kneeling pad). I them inserted the wires and slipped in the block, then the switch and glued the lid on. The soft rubber was used to hold the switch up against the bottom of the glued-on lid.
https://www.tinkercad.com/things/41y9oGhpmdx-microswitch-box-verticle/edit?returnTo=https%3A%2F%2Fwww.tinkercad.com%2Fdashboard&sharecode=uDWpHQQndLle78LFALooLlvJJlrWgKvG0558SKcduhE