Singer 760 Sewing Machine Cam Stack Driving Gear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A reproduction of a cam stack driving gear, model with notches to fit into the plastic cam stack.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 34
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A reproduction of a cam stack driving gear, made for a Singer 760 that needed a replacement of the original one which was cracked. This model has two notches to fit into the bottom of the plastic cam stack as shown in the pictures.
I would recommend printing it from PETG, with 100% infill.
If the gear printed from your printer is not a good fit, you can adjust the module of the gear in InvoluteGear step, either lower or higher to achieve a snug fit, using FreeCAD (version 1.0.0) with the FCGear Workbench plugin.
I used silicon grease between the worm gear and the printed gear.