1 / 5
Ceiling rail hardware for 80x16 rails in VW Transporter T6.1 — image 1
1 / 5

Ceiling rail hardware for 80x16 rails in VW Transporter T6.1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Spacers and end caps for aluminium rail with an 80x16 profile, for use when installing into a VW Transporter T6.1.

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
512
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

I wanted to install some ceiling rails in my VW Transporter T6.1 so designed some models to assist with that (mostly so I can slide my surfboard into it, other model here). 

I drilled 4 x 6mm holes in the top of the rails to match the existing holes in the van ceiling. I wanted the bolts to be recessed so also drilled 19mm holes so that the bolts don't protrude above the rail.   

I created some spacers (33mm tall) to allow the straight rail to be mounted to the curved ceiling.

Bare cut aluminium doesn't look great so I created some end caps that clip on the end and are easily removable. I also created some 19mm caps for the drill holes. 

I used the following hardware: 

  • 3m rail with 2 T-slots (80x16 profile) cut into lengths of 1040mm. Source: https://uk.rs-online.com/web/p/tubing-and-profile-struts/1873279. 
  • M6 rivnuts (I had to widen the existing holes in the ceiling panel slightly using an 8mm drill bit, then used primer to ensure the bare metal doesn't rust)
  • 4 x 25mm M6 hex socket bolts for the rail ends   
  • 4 x 60mm M6 hex socket bolts for the rail centers   

On printing the end caps: I used Orca Slicer's Tree Slim supports just so that the end clips have a bit of flex in them (see build plate screenshot). 

 

Tags