1 / 3
JK bms Mount for MEB module
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
used to mount a JK inverter BMS to a MEB battery module
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 59
- Makes
- 0
- Views
- 808
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
i made this part to mount a JK inverter BMS to a 6,85KWh MEB LiIon battery module (12s in my case)
the printed part also covers the battery terminals to protect them.
i made a cutout, so a 10mm socket can reach the screws for the battery terminals. this way you can still tighten/loosen the m6 connection.
the part is attached to the model with 20mm m5 screws. i did not use threaded inserts. i made the hole a little smaller than 5mm so the screw forms its own thread in the plastic. same for the m3 screws that hold the bms