1 / 5
Breville Infizz Full Size CO2 Tank Adaptor Wrench — image 1
1 / 5

Breville Infizz Full Size CO2 Tank Adaptor Wrench

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This allows you to attach a full-size CO2 tank to a Breville Infizz without disassembling the appliance.

Rating
0 / 5
Likes
6
Downloads
53
Makes
0
Views
274
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

This wrench allows you to attach an adapter for full-size CO2 tanks to a Breville Infizz. The Infizz doesn't have an easily removable back panel, which makes this modification difficult.

This particular wrench is designed to fit all the way into the Breville's cavity which normally holds small Sodastream style CO2 tanks. The nose cone splits into halves and fit into the midsection using a keyed shaft. The wrench is designed to be assembled and disassembled in situ for non-destructive modification of the Infizz, but as-designed can also be left inside of the tank cavity.

The 20lb to Sodastream/TR21-4 adapter this is designed around is here: https://www.amazon.ca/dp/B08L795VRB


To assemble:

  1. Place the adapter line between the two halves of the nose cone. 
  2. Fit the keyed shaft of the nose cone into the midsection. The axial slot in the midsection will allow the line to follow through
  3. Fit the bottom section into the midsection similarly.
  4. Slide the hexagonal nut on the adapter into the matching segment on the nose cone.

Usage Notes:

  • You will need to apply some pressure on the hose to keep the adapter from sliding out. Applying a little blue tape to the hose at the bottom of the base section should be more than adequate if it is troublesome. The fits are deliberate to ensure that the entire assembly easily comes out of the Breville Infizz
  • PLA works fine, the force required to screw in the adapter is quite low

Native CAD (3DXML for SOLIDWORKS xDesign/3DEXPERIENCE), STEP, and 3MF files are provided.

Tags