1 / 19
14 Pwnagotchi Cases
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Your Pwnagotchi needs a home? This is it! (^‿‿^)
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 59
- Makes
- 0
- Views
- 380
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Check out my newest Pwnagotchi case here
Fourteen versions of the case are included:
- Inky display.
- Inky display with a carabiner loop.
- Inky display slimagotchi mod.
- Inky display slimagotchi mod with a carabiner loop.
- Waveshare display (v1/v2).
- Waveshare display (v1/v2) with a carabiner loop.
- Waveshare display (v1/v2) with a PiSugar 1200mAh battery.
- Waveshare display (v1/v2) with a PiSugar 1200mAh battery and a carabiner loop.
- Waveshare display (v1/v2) slimagotchi mod.
- Waveshare display (v1/v2) slimagotchi mod with a carabiner loop.
- Waveshare display (v1/v2) slimagotchi mod with a PiSugar 900mAh battery.
- Waveshare display (v1/v2) slimagotchi mod with a PiSugar 900mAh battery and a carabiner loop.
- Waveshare display (v1/v2) slimagotchi mod with a PiSugar 1200mAh battery.
- Waveshare display (v1/v2) slimagotchi mod with a PiSugar 1200mAh battery and a carabiner loop.
The lid snaps in flush with a 0.1mm tolerance. May require some force (or sandpaper) if your printer isn't very precise, but normally should be fine. If the lid moves too freely, just apply some glue.
Step files are included.
Based on 3mu1or's wonderful design. Optimized for a slightly better fit, Waveshare version is added.
Waveshare V4 and V3 have the same measurements as the V1 and V2!