[Tilted Down] Unifi G3/G4/G5 Bullet Desktop / Table Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.45 – €2.99 net (excluding VAT)
For file: cone-stand-tilted-down_0.4n_0.2mm_PLA_COREONE_2h12m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.72 excluding VAT (range midpoint).
- Weight reported by the author
- 45 g
- Print time reported by the author
- 2.19 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Another table stand for the Unifi G5 Bullet, but this time tilted down.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 61
- Makes
- 0
- Views
- 274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you want to put your Unifi Bullet G5 on a high shelf instead of a wall, this is for you.
The print is technically two files, the cone stand model provided here, combined with the ring with the provided elsewhere mount.
This is just a little stand that you can add the
unifi bullet mount 1.2.STL from https://www.printables.com/model/468065-unifi-bullet-g3g4g5-mount/files to, creating a screw-in stand for your table top or shelf.
The Core One print file has these pre-combined, and with a downward tilt. Use the 3mf to adjust the tilt yourself.