Side Storage, adjusted for 8x3mm magnets
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€9.10 – €11.12 net (excluding VAT)
For file: side-storage_0.4n_0.25mm_PLA_COREONE_6h47m-S7h40m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €10.11 excluding VAT (range midpoint).
- Weight reported by the author
- 196 g
- Print time reported by the author
- 6.78 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The original was made for 8x2mm magnets, I adjusted to 8x3mm
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 125
- Makes
- 6
- Views
- 477
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
This is a remix of Prusa Core One Side Storage by Swing King Design
They mentioned that it may be helpful to increase the magnet size, and I had 8x3mm ones handy. This works perfectly for my needs, thought I'd share it with others.
I printed this with the 0.4mm nozzle at 0.25mm layer height. Came out great, so the 3mf and the bgcode are attached.