ISCG05 Chain Guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chain Guard for ISCG05 mounts
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 407
- Makes
- 4
- Views
- 1,763
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
This is a chainguard for ISCG05 mounts, it may remind both of the Absolute Black chainguard and the OneUp chainguard, but that is totally unintentional.
If you came here looking for an ISCG05 Chainguard, you know what they do.
The parts go together using one M5 x 12mm bolt and a nut that should go in the slot on the rear.
The top part of the chainguard itself can rotate to enable removal of chain.
You may or may not need to add shims.
There are slots on the part that extends that can be used for zip-tying stuff that needs to be zip-tied, like cables that rub if they are not in the correct position as is the case on my bike.
Print with supports on build plate only. I use Add-North X-PLA which is great as long as you don´t live in a desert.