1 / 3
Tornado Vortex Tube (Customizable) — image 1
1 / 3

Tornado Vortex Tube (Customizable)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a very simple tube to create a water tornado. There are no threads so you'll need to use hot glue or epoxy to…

Rating
0 / 5
Likes
12
Downloads
90
Makes
0
Views
1,138
Reviews
0

Updated at source:

Model information

Category
Engineering
License
Creative Commons — Attribution

This is a very simple tube to create a water tornado. There are no threads so you'll need to use hot glue or epoxy to connect the bottles together. Here are two options: print big enough to glue the caps into the connector or glue the bottles directly to the connector.

Experiment with different sized nozzle diameters, small diameters are more difficult to get the vortex but take longer to drain.

Strongly recommend using the Customizer in OpenSCAD, the stl is for a random Chinese water bottle and not the same dimensions as a standard soda bottle.

 

 

Print Settings

Printer:

Raise3D E2

Rafts: 

No

Supports:

No

Resolution: 

0.2

Infill:

30%

Filament:

eSun PLA+


 

Notes:

If you have problems with water leaking out use enough shells to make sure it's water proof (3 or 4).

Also a great suggestion from dejf: Waterproof is easily achieved by hot air melting the surface of print - it requires a good source with temp setting and a bit of experience to see the point of no return to original shape in advance. Also wider perimeters help, because they have lower chance of holes between layers - just try something like 0.55 instead of .45

Category: Engineering

Tags