1 / 1
PowerPole bulkhead mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Use the notched connectors to prevent rotation. Include single and double connector versions. Double version comes with a short mount. Secure with a piece of filament: align the connector with the face of the print, make sure the connector it is not sitting proud of the finished surface. A piece of 28-30mm, 1.75mm diameter filament will slide right through.
The filament won't work if you mount the roll pins on the connector - but inserting the filament will act as a roll pin itself.
Bulkhead hole: 30mm, thru.