Sanding Stick - Spring-loaded
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 10mm sanding stick which is based on an existing one available in the UK. The inspiration was:…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 39
- Makes
- 0
- Views
- 438
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
This is a 10mm sanding stick which is based on an existing one available in the UK.
The inspiration was: https://www.amazon.co.uk/Proops-Finger-Sander-W3291-Postage/dp/B00AIOV444/ref=sr_1_9?ie=UTF8&qid=1517606552&sr=8-9&keywords=finger+sander
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
Yes
Resolution:
0.25
Infill:
15%
Notes:
Sanding belts are available on Amazon: https://www.amazon.co.uk/Proops-Spare-Finger-Sander-Postage/dp/B00AIOXV4U/ref=sr_1_5?ie=UTF8&qid=1517606121&sr=8-5&keywords=proops+belts
Post-Printing
Assembly
You'll need a compression spring - the one I used is 18mm long, with a diameter of 9.5mm.
Print the three parts, and glue the centre post (shown in blue) into the outer shell. Try to get this as central as possible.Install the spring onto the post and push the (red) body into the shell. It will click over the retaining clips.
From here you simply compress the body into the shell and install a new belt.
Category: Art Tools