Hadicová regulační zavlažovací tryska / Irrigation nozzle with regulation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hadicová regulační zavlažovací tryska na 1/2" hadici.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 79
- Makes
- 0
- Views
- 560
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Tryska a rukojeť - bez podpěr s límcem. Tělo - podpěry všude a větší límec.
Výplň 100%, kvalita 0,20 mm STRUCTURAL, materiál PETG.
Pro správnou funkci je potřeba tělo trysky opatřit “O” kroužkem 14x3 NBR a po připojení na hadici použít hadicovou sponu 12-20 mm.
Po vytisknutí díly očistit. Závit na těle začistit jehlovým pilníkem, v trysce zabrousit vnitřní šev, který je v kontaktu s “O” kroužkem. Při kompletaci trysky a těla závit namazat - použil jsem sádlo. Po montáži trysky na tělo nasadit rukojet a rukojet s tělem slisovat - je tam osazení. Před slisováním nezapomenout na “O” kroužek !
Pokud nehoníte čas, trysku bych doporučil tisknout v lepší kvalitě, při tlaku 6 bar povrch místy slzí.
Nozzle and handle - without supports with a collar. Body - supports everywhere and a larger collar.
Filling 100%, quality 0.20 mm STRUCTURAL, material PETG.
For proper function, the nozzle body needs to be provided with an “O” ring 14x3 NBR and after connecting to the hose use a hose clamp 12-20 mm.
After printing, clean the parts. Clean the thread on the body with a needle file, grind the inner seam in the nozzle, which is in contact with the “O” ring. When assembling the nozzle and body, lubricate the thread - I used grease. After mounting the nozzle on the body, put the handle on the body and press the handle with the body - there is a seat there. Before pressing, do not forget about the “O” ring!
If you are not in a hurry, I would recommend printing the nozzle in better quality, at a pressure of 6 bar the surface tears in places.