Picoscope 2204 alternate rugged case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a rugged case for Picoscope 2204
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 1
- Views
- 188
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an alternate rugged case for Picoscope 2204 based on the original model “Picoscope 2204 rugged box” available on Printable.
In the original design the lid with the plate allowing the storage of the cables is design in one part to print: this required a lot of support material to print this part.
The proposed design uses a separate lid and cable plate part. The lid is design to received M3 threaded insert. The cable plate in mounted on the lid with M3 countersunk head screws (length 10 or 12mm).
Required hardware:
6x M3 x 30mm screws for the assembly of the lid on the box
5x M3 threaded insert and 5xM3 countersunk head screws (length 10 or 12mm) for the assembly of the cable plate to the lid.
For the M3 threaded insert, I used the following model:
The Fusion 360 project file is also provided.