Nextruder Main Plate load cell protection - no supports (Prusa XL, Prusa Core One, Prusa MK4)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
remix designed to prevent filament jamming and to protect the load cell, no supports
- Rating
- 4.75 / 5
- Likes
- 53
- Downloads
- 379
- Makes
- 8
- Views
- 2,640
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
As stated by the original project here:
Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source of problem. On the other hand, when the filament wraps around the gear it can damage or even destroy the load cell. This design also protects the load cell.
In the files tab, you can find gcode for printing using Prusa XL and 3mf files for Prusa Xl and Prusa Core 1/mk4.
⚠⚠⚠ Use OrcaSlicer to open the project file ⚠⚠⚠
Print it (0.1mm layer height).
After printing, remove the sacrificial layer and follow the instructions for your printer:
Here is a video on how to change the main plate:
The transparent nextruder cover can be printed using this model.
